Skip to content.
Return to Department of Building and Housing home page.

Other guidance information

Other guidance information, including Practice Advisories, published under section 175 of the Building Act 2004. Subscribe to receive Practice Advisory updates »

Practice Advisory 9: Significant changes in structural design - New Loadings Standards have been cited with substantial modifications
Practice Advisory 9: New loading standards cover.  

What sort of publication it is: Colour information sheet
Who it's for: Structural engineers, manufacturers of proprietary structural components and building consent authorities.
What it contains: Information about the B1 Compliance Document including Amendment 8 that becomes effective on 1 December 2008. The main topics it covers are:

  • citing the AS/NZS 1170 suite of Structural Design Action Standards
  • deleting NZS 4203 as part of the Verification Method
  • involving an experienced structural engineer such as a CPEng when using B1/VM1
  • modifying some of the AS/NZS 1170 requirements
  • limiting the scope of B1/VM1
  • deleting obsolete Standards from the VM including NZS 1900: Ch 11.2, AS/NZS 1664: Part 2, NZS 3106, NZS 4219 and NZS 4230:1990.
  • citing NZS 4230: 2004 for masonry design
  • citing SNZ HB 8630 for tramping track structure loads
  • reducing roof loads of AS/NZS 1170.1 to be comparable with NZS 4203 loads
  • clarifying scope and application of barrier loads of AS/NZS 1170.1 and reducing them in some cases
  • reinstating the face load of 0.5 kPa following a fire – not required by AS/NZS 1170
  • allowing territorial authorities to specify wind and snow loads
  • raising the minimum ground snow load in Canterbury, Otago and Southland above that given by AS/NZS 1170.3

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 8: Don’t be undone – anchor your spiral
Practice Advisory 8: Use with care [PDF 151 KB, 2 pages].  

What sort of publication it is: Colour information sheet
Who it's for: Building designers and construction contractors
What it contains: Information about anchoring and splicing spiral reinforcing in circular columns. The main topics it covers are:

  • what happens when spiral reinforcing isn’t anchored or spliced correctly
  • do’s and don’ts
  • acceptable practice
  • 135-degree hooks
  • welded laps
  • mechanical connectors
  • references.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 7: Use with care
Practice Advisory 7: Use with care [PDF 35 KB, 2 pages].   What sort of publication it is: Colour information sheet
Who it's for: Building designers and construction contractors
What it contains: Information about using Grade 500E steel in new buildings. The main topics it covers are:
  • source of supply, method of manufacture and identification
  • bending Grade 500E
  • redending Grade 500E
  • welding Grade 500E
  • do's and don’ts
  • background information
  • where to find further information.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 6: Achieve best practice – every step of the way
Practice Advisory 6: Achieve best practice – every step of the way [PDF 85 KB, 4 pages].   What sort of publication it is: Colour information sheet
Who it's for: Building designers, building officials and construction contractors
What it contains: Information about general design and construction practice. The main topics it covers are:
  • diaphragm load paths and detailing
  • new methods and forms of construction
  • detailing requirements for reinforcement
  • anchoring spiral reinforcement columns
  • rebending reinforcement
  • reinforcement for lateral bursting
  • Grade 8.8 bolts
  • shear design of beams
  • uneven loading
  • precast concrete
  • saw cuts in diaphragms
  • buckling restraint
  • composite steel beams
  • serviceability.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 5: Allow for movement
Practice Advisory 5: Allow for movement [PDF 97 KB, 2 pages].   What sort of publication it is: Colour information sheet
Who it's for: Building designers and building officials
What it contains: Information about using precast hollow-core floor assemblies in new buildings. The main topics it covers are:
  • issues of concern about the design of precast hollow-core floor assemblies, particularly for earthquake shaking
  • do's and don’ts
  • background information
  • hollow-core flooring details
  • where to find further information.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 4: Do sweat the 'small' stuff

 
Practice Advisory 4: Do sweat the 'small' stuff [PDF 250 KB, 12 pages].   What sort of publication it is: Colour information sheet
Who it's for: Building designers and construction contractors
What it contains: Information about design and detailing of structural steel connections. The main topics it covers are:
  • issues of concern about structural steel connection design and detailing
  • do's and don’ts
  • background information
  • where to find further information.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

 Practice Advisory 3: Beware of limitations
Practice Advisory 3: Beware of limitations [PDF 56 KB, 1 page].   What sort of publication it is: Colour information sheet
Who it's for: Building designers and construction contractors
What it contains: Information about using cold-worked wire mesh in new buildings. The main topics it covers are:
  • issues of concern about using cold-worked wire mesh in situations where ductility in an earthquake is needed
  • do's and don’ts
  • background information
  • where to find further information.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 2: Pay attention to the basics!
Practice Advisory 2: Pay attention to the basics! [PDF 58 KB, 1 page].   What sort of publication it is: Colour information sheet
Who it's for: Building designers
What it contains: Information about showing structural concepts and load paths on documents submitted with building consent applications. The main topics it covers are:
  • issues of concern about structural concepts and load paths
  • do's and don’ts
  • background information.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Practice Advisory 1: Bend the bar but not the rules
Practice Advisory 1: Bend the bar but not the rules [PDF 58 KB, 2 pages].   What sort of publication it is: Colour information sheet
Who it's for: Builders and building site supervisors using reinforcing steel
What it contains: Information about how to bend reinforcing steel properly to avoid fracturing and weakening it. The main topics it covers are:
  • issues of concern about bending and rebending reinforcing steel
  • do's and don’ts
  • background information
  • where to find further information.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy

Reinforcing steel in New Zealand - A quick guide for designers, building consent authorities and contractors

Reinforcing steel in New Zealand - A quick guide for designers, building consent authorities and contractors [PDF 171 KB, 2 pages].   What sort of publication it is: Colour wallchart
Who it's for: Building designers, building officials and construction contractors
What it contains: Information about Grade 500E steel available in New Zealand. The main topics it covers are:
  • comparison of Grade 500 reinforcing steel commonly available in New Zealand
  • required reinforcing bar properties to AS/NZS 4671 steel reinforcing materials
  • minimum bend diameters
  • overstrength factors for capacity design
  • checklists.

How much it costs: Free
How to get it: Download a PDF or call 0800 242 243 for a hard copy